FireLite MS-9050UD, MS-9200UDLS and MS-9600LS//MS-9600UDLS

With three sizes to choose from, the 50-point MS-9050UD, the 198-point MS-9200UDLS and the 636-point MS- 9600LS/MS-9600UDLS, our updated addressable series can handle your small through mid-sized applications. We've maintained our ease of installation, programming
and maintenance, reducing the time it takes to get a system up and running. Plus, the MS-9200UDLS and MS-9600LS/MS-9600UDLS offer LiteSpeed™ blazin' fast polling protocol to ensure the safety and security of your building and its occupants.

All three new panels also offer:

• Ability to connect devices via unshielded "fire" wire up to 10,000 feet, allowing for easier retrofits and less install time
• Autoprogram locates and programs the panel for each device and insures correct addressing and type of device
• Larger, common backbox enclosure that allows more room to work
• All electronics mounted on chassis, which can be changed by removing only two nuts, for faster change-outs and easier upgrades
• Notification appliance circuits all have built-in synch for the industry's leading manufacturers including System Sensor®,Wheelock® and Gentex®
• Compatibility with Fire-Lite's Internet Fire Communicators, for communicating alarms over WAN or LAN to the central station

FireLite MS-25 25 Point Fire Alarm Control

The MS-25 is the latest addition to the broad array of Fire-Lite Alarms offerings, which have long set the standard for providing a solution to satisfy every application. The new, 25 point MS-25 fire alarm control panel provides a cost-effective addressable solution to meet even the smallest specification.

But unlike other small panels, the MS-25 is a fully featured, Addressable alternative…at a Conventional panel price. It runs on only a single loop of standard wire, provides pinpoint identification, and includes maintenance alerts and auto-programming. The MS-25 supports any combination of its own HFS detectors and modules (see below).

• Right-sized, giving “Addressable” benefits at a low Conventional alarm price
• Factory programmed, or use your web browser
• Built-in communicator
• Uses any wire
• Uses cost-effective Honeywell Fire Systems Detectors and Modules

FireLite Conventional Fire Control Panels

Fire-Lite's UL 9th Edition listed 24 Volt conventional fire alarm control panels bring the latest in microprocessor technology to conventional fire controls and are easy-to-install, program and operate. With two-zone, four-zone, five-zone and ten-zone configurations, these units offer a variety of options to meet most local, state and national requirements.

MS-5UD UPLOAD/DOWNLOAD

• • Five-zone Style B (Class B) or Five-zone Style D (Class A) with optional module
• Four NAC Circuits Style Y (Class B) or Four NAC Circuits Style Z (Class A) with optional modules \
• Built-in NAC synchronization for System Sensor, Wheelock, Gentex, Faraday and Amseco devices
• Integral 80 character LCD display with backlighting and keypad
• Annunciator bus supports up to 8 devices, including new ANN-80 LCD Remote Annunciator, ANN-S/PG remote serial or parallel printer gateway, ANN-RLY, 10 form C relay board, ANN-LED Zone annunciator and ANN-I/O LED driver board for graphic annunciators.
• Built-in two-line digital communicator for off premises monitoring
• Three Form-C programmable relays
• 3.0 amps total usable current

MS-2

• Two initiating zones compatible with 2- and 4-wire smoke detectors, one zone programmable for combo, supervisory and waterflow
• One Notification Appliance Circuit (NAC) with builtin horn/strobe synchronization for System Sensor®, Wheelock® or Gentex® with selectable silence.
• Also compatible with conventional input devices such as two and four-wire smoke detectors, pull stations, waterflow devices, tamper switches and other normally-open contact devices.
• 3.0 amps total usable current

MS-10UD UPLOAD/DOWNLOAD

• Ten-zone Style B (Class B) or Ten-zone Style D (Class A) with optional module
• Four NAC Circuits Style Y (Class B) or Four NAC Circuits Style Z (Class A) with optional modules
• Built-in NAC synchronization for System Sensor, Wheelock, Gentex, Faraday and Amseco devices
• Built in programmer: Integral 80 character LCD display with backlighting and keypad
• Annunciator bus supports up to 8 devices, including new ANN-80 LCD Remote Annunciator, ANN-S/PG remote serial or parallel printer gateway, ANN-RLY, 10 form C relay board, ANN-LED Zone annunciator and ANN-I/O LED driver board for graphic annunciators.
• Built-in two-line digital communicator for off premises monitoring
• Three Form-C programmable relays
• 7.0 amps total shared power

MS-4

• Four initiating zones compatible with 2- and 4-wire smoke detectors, one zone programmable for combo, supervisory and waterflow
• Two NACs with built-in horn/strobe synchronization for System Sensor®, Wheelock® or Gentex® with selectable silence
• Optional module to convert all four initiating zones and two NACs to Class A
• Also compatible with conventional input devices such as twoand four-wire smoke detectors, pull stations, waterflow devices, tamper switches and other normally-open contact devices.
• Compatible with System Sensor's smoke detectors, providing "EZ Walk Test" and a Remote Maintenance Signal (panel is offered as i3 Ready, no additional modules needed)
• 3.0 amps total usable current and expandable to 6.0 amps total with optional second transformer
• Options include a plug-in 4XTMF transmitter module, a 4XLMF module to support LED annunciators, and a plug-in 4XZMF zone relay module